From the free quote to the final rinse, concrete sealing in Butte, MT follows a simple process: inspect, protect, clean, rinse and check.
The right method for the job
Signs you need concrete sealing
- Water soaks in instead of beading
- Stamped concrete looks faded and dull
- Surface flaking or spalling has started
- Stains soak in quickly
What causes the dirt and stains
- Old sealer worn away by sun and traffic
- Freeze-thaw cycles and deicing salts
- Unsealed concrete absorbing oil and water
What you can do yourself
- Do the water test: sprinkle water and see if it darkens the concrete quickly
- Keep traffic off a newly sealed surface for the time on the label
- Avoid deicers that contain ammonium nitrate or ammonium sulfate
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Sealing dirty or damp concrete, which traps stains and turns cloudy
- Slippery finishes without an anti-slip additive
- Applying too thick a coat, which peels
How we handle concrete sealing
- Clean the concrete thoroughly
- Treat stains and let the surface dry
- Repair cracks where needed
- Apply a penetrating or film-forming sealer
- Keep traffic off until it cures
Typical concrete sealing prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Concrete Sealing in Butte, MT
Freeze-thaw cycles and deicing salt are hard on concrete in Montana. Cleaning it in spring and sealing it before winter reduces how much water and salt soak in, which is what causes surface flaking (spalling).
Crews serve all of Butte (ZIP codes 59701, 59702, 59703, 59707 and 59750), plus Warm Springs (17.1 mi), Anaconda (21.4 mi), Deer Lodge (28.6 mi) and Montana City (46.8 mi). Call (555) 010-0000 for a free quote in Butte.
Concrete Sealing: frequently asked questions
How much does concrete sealing cost in Butte, MT?
Concrete Sealing typically costs $400-$1,200 for a typical driveway or patio, and usually takes 1 day plus cure time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for concrete sealing?
Concrete Sealing is usually done with clean, then seal, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.
Is concrete sealing safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule concrete sealing?
Every 2-5 years, depending on the sealer. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.